GVM 2 Pack LED Video Lighting Kits with APP Control, Bi-Color Variable 2300K~6800K with Digital Display Brightness of 10~100% for Video Photography, CRI97+ TLCI97 Led Video Light Panel +Barndoor

I now have 7 of these
I bought 3 of these lights two years ago, but recently bought two more packages of two of these same LED light panels. One pair arrived with a problem controlling the orange LEDs of one of the panels, but a hone call to the GVM help number got a replacement in the mail quickly with only a request for a cell phone video so they could see the problem. All of these panels can be separately controlled via a WIFI App, downloadable from the Play Store Free. They will all work together well right out of the box, but only manually. You need to use the App if you want to control them remotely. Most of the time, my light panels are mounted to a ceiling support frame in my studio, so out of reach unless by step ladder.The latest version of the App works much better than the 2 year old version, but it still has a few small quirks that could use refining, and instructions for using the App are sadly lacking detail. So from my experience, here is some added info on how to control these lights remotely via the App. The App is readily available via the Play Store FREE. Download it into your cell phone and then using the instructions below you should be able to set up each of your light panels to work remotely via the cell phone App.When using the App, the cell phone must be switched from it’s Internet WIFI connection to the desired LED panel to gain control. With multiple lights, each light must be re-named so that each can be addressed separately. Out of the box, each has the same GVM-LED name. You do this renaming via the App maintenance screen on the cell phone (upper left button). They will not all work remotely with just one WIFI name. The renaming is done with the App and is easy, but only the light being renamed can be powered on during this renaming.. “GVM-ADMIN” is the password. It’s in the paper instructions as well. I used GVM-LED1, GVM-LED2, etc for my renaming scheme.When you have finished renaming each light, each time that you hit the “connect” button on the main App screen (upper right) you will be taken to a list of WIFI addresses. The first on the list is likely your internet connection, so you need to remember this to switch back to when finished using the GVM light control App. The App screen (upper right button) then lets you connect to the WIFI screen and you select the desired LED panel (GVM-LED) and then rename it (GVM-LED1, Etc.) to be able to select and control from this WIFI list. After renaming select the one that you want to control and then close this screen to be taken back to the App screen. Look at the top of the screen and wait for the “Connected” indication. You should then be able to turn the selected LED panel on and off, and change both the color and brightness. (sometimes requires several on, off cycles to get working). Repeat the renaming process for each LED panel. Also, remember to change the WIFI connection back to your Internet WIFI address before exiting the App, or your cell phone won’t receive the internet until you do.The “Channel” selection on the left of the App screen does nothing, at least nothing that I can find. When connected, the App lets you quickly adjust brightness or light frequency of each panel and turn the panel on and off. When first connecting power, if the LED power switch is on, the panel will turn on as the power is connected (it defaults to manual control). When it receives the WIFI signal for it’s name it then follows the WIFI signal .These are not very bright for video needs unless many of them are used, but they only draw about 30 watts each. Their light is quite soft, so modifiers (soft boxes) aren’t really needed. The included barn doors are at times handy. There is a thin plastic diffuser panel that can be slid out and a colored panel added as a replacement. I wish the diffuser panel gap was wide enough for both diffuser and colored plastic, but it is not. I have considered adding washers to space the frame out to make the slot wider, but haven’t done so, yet. Using all 7 GVM-LED 480 LS panels gets me enough light to light a banquet table area with 2 subjects sitting at it, within my studio. The lights are all attached to a ceiling mounted lighting grid, so no stands are on the floor. Power comes from above as well. At a video recording speed of 60 fps and 400 ISO I have enough even and relatively shadow free light to make good videos in this table area at F4.5-5 level , but all of the LED Panels need to be at 100% and close to 5600 K output for this. My attempts to use these LED panels outdoors has proven them not near bright enough, unless used in very shady areas. Still photography of children and pets that don’t handle flash photography well can also be done with these lights, but again, these lights are not near bright enough in many desired shooting setups, unless using many LED panels or very close positioning. The Inverse Square Law applies to these lights too.

Lighting Solid
Great!!

Hairstylist Essential
These lights are amazing and are worth the money!!! I have a hair page and it took my lightning to the next level I’m so happy with these and extra pleased with my pictures!!!❤️ Thank you God, Amen!

Best choice
The light is verry nice